Boxer SoftCam - ekspert hjælp søges!

   Jeg prøver og få en softcam løsning til boxer til og spille - men det virker ikke. Jeg er nybegynder, så der er forhåbentlig noget grundlæggende jeg har overset! 
Bruger en Smartgo reader sat op til Com4, og har prøvet med NewCS 1.65 i PC versionen + ACamd 0.6.1.0 +  DVBViewer Pro.

Min newcs.xml fil ser sådan her ud:

<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM4</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>12000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache> 
<debug>
<password>NewCSpwd</password> 
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>0102030405060708091011121314</deskey>
<user>
<name>User1</name>
<password>Pass1</password>
<au>on</au>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>
cardclient.conf ser sådan her ud:

newcamd:localhost:12000:1/0500/ffff:User1:Pass1:0102030405060708091011121314
I min promt gir NewCS.exe dette output 

This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:54:08
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 19:27:26 ] [ Box detect ] Windows Vista Build 7600
[ 19:27:26 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO
[ 19:27:26 ] [ Config ] COM4 ECM priority: round
[ 19:27:26 ] [ EMM Cache ] Initialising dynamic Cache
[ 19:27:26 ] [ ECM Cache ] Initialising dynamic Cache
[ 19:27:26 ] [ Loader ] Starting Telnet on port 1001
[ 19:27:26 ] [ Loader ] Reader type 2 on node COM4
[ 19:27:26 ] [ Phoenix ] Opening device COM4
[ 19:27:26 ] [ Phoenix ] Setting parity to ODD on node COM4
[ 19:27:26 ] [ Phoenix ] Setting 1 Stop bit on node COM4
[ 19:27:26 ] [ Phoenix ] Setting baud to 9600
[ 19:27:28 ] [ ATR ] T=0  1etu=8.68us  Guardtime:12etu  WWT:115200etu
[ 19:27:28 ] [ ATR ] Historical bytes: [C2] z A [02] h [90] [00]
[ 19:27:28 ] [ Loader ] Init Viaccess card
[ 19:27:28 ] [ Phoenix ] Setting parity to ODD on node COM4
[ 19:27:28 ] [ Phoenix ] Setting 1 Stop bit on node COM4
[ 19:27:28 ] [ Phoenix ] Setting baud to 9600
[ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 0 on Provider 000000 for caid 0500 ID=0
[ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider FFF510 for caid 0500 ID=0
[ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040100 for caid 0500 ID=1
[ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040110 for caid 0500 ID=2
[ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040120 for caid 0500 ID=3
[ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040130 for caid 0500 ID=4
[ 19:27:29 ] [ Loader ] Card 0500 on port COM4 ready
[ 19:27:29 ] [ Loader ] Starting Newcamd Server on port 12000
[ 19:27:29 ] [ Newcamd ] Newcamd thread Server started on port 12000
newcamd: main loop
[ 19:33:11 ] [ Newcamd:12000 ] User User1 logged in, client: Generic
[ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0
[ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0
[ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0
[ 19:34:12 ] [ Newcamd:12000 ] User User1 logout
ACamd gir dette output i DVBviewer plugin:

19:32:14.158: structloaders: registering loader keys
19:32:14.158: cardclients: registering cardclient Camd35
19:32:14.158: systems: registering CA system Cardclient, pri -15, ident 1000
19:32:14.158: structloaders: registering loader cardclient config
19:32:14.158: cardclients: registering cardclient CCcamN
19:32:14.158: cardclients: registering cardclient EmuBox03
19:32:14.158: cardclients: registering cardclient Gbox
19:32:14.158: cardclients: registering cardclient GboxN
19:32:14.158: cardclients: registering cardclient MboxN
19:32:14.158: cardclients: registering cardclient Newcamd
19:32:14.158: cardclients: registering cardclient Radegast
19:32:14.158: systems: registering CA system SC-Irdeto, pri -10, ident 1001
19:32:14.158: feature: using feature SMARTCARD
19:32:14.158: registering Irdeto smartcard (id 49726474)
19:32:14.158: systems: registering CA system SC-Seca, pri -10, ident 1002
19:32:14.158: registering Seca smartcard (id 53656361)
19:32:14.158: systems: registering CA system SC-Viaccess, pri -10, ident 1003
19:32:14.158: registering Viaccess smartcard (id 56696173)
19:32:14.158: systems: registering CA system SC-Conax, pri -10, ident 1004
19:32:14.158: registering Conax smartcard (id 436f6e78)
19:32:14.158: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
19:32:14.158: registering Cryptoworks smartcard (id 4372576f)
19:32:14.158: systems: registering CA system SC-Nagra, pri -10, ident 1006
19:32:14.158: registering Nagra smartcard (id 4e616772)
19:32:14.158: systems: registering CA system SC-NDS, pri -10, ident 1007
19:32:14.158: registering NDS smartcard (id 56694732)
19:32:14.159: ACamd v0.6.1.0
19:32:14.159: structloaders: registering loader smartcard data
19:32:14.498: Betatunnel:CAID:1833 Provider:00000000 to CAID:1702 Provider:00000000
19:32:14.498: Engine DVB Viewer Pro
19:32:14.498: loading smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf
19:32:14.499: loaded 9 smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf
19:32:14.499: loading cardclient config from C:\Program Files\DVBViewer1\Plugins\cardclient.conf
19:32:14.500: now using protocol version 525 (cdLen=8)
19:32:14.500: hostname=localhost port=12000 emm=1 emmCaids 0500/ffff
19:32:14.500: Newcamd: username=User1 password=Pass1 key=0102030405060708091011121314 providers=none
19:32:14.500: client 'Newcamd' ready
19:32:14.500: ** registered systems:
19:32:14.500: ** SC-NDS            (pri -10)
19:32:14.500: ** SC-Nagra          (pri -10)
19:32:14.500: ** SC-Cryptoworks    (pri -10)
19:32:14.500: ** SC-Conax          (pri -10)
19:32:14.500: ** SC-Viaccess       (pri -10)
19:32:14.500: ** SC-Seca           (pri -10)
19:32:14.500: ** SC-Irdeto         (pri -10)
19:32:14.500: ** Cardclient        (pri -15)
19:32:14.500: no smartcard interface defined!
19:32:17.511: 
19:32:17.536: Ch: 101 - DR1 
19:32:17.536: Programm crc: 009A2FB3
19:32:17.536: PMT: ACamd_PMT.txt, search, not found PMT=0065 (AND SID=0065)
19:32:17.660: Incomming PackageSize [188]
19:32:18.088: Auto search..., not found...
19:32:18.088: 0x0065 0x0065 0x0500 0x00040100 0x0000 0x0029 1111110
19:33:01.271: 
19:33:01.420: Ch: 2050 - DR Ramasjang 
19:33:01.420: Programm crc: BC49119B
19:33:01.421: PMT: ACamd_PMT.txt, search, not found PMT=0802 (AND SID=07D5)
19:33:01.802: Auto search..., not found...
19:33:01.802: 0x0802 0x07D5 0x0500 0x00040100 0x0000 0x0029 1111110
19:33:09.459: 
19:33:09.559: Ch: 4000 - TV 2 Charlie 
19:33:09.559: Programm crc: 8BBA926A
19:33:09.559: PMT: ACamd_PMT.txt, search, not found PMT=0FA0 (AND SID=0FA0)
19:33:10.296: Auto search..., not found...
19:33:10.297: 0x0FA0 0x0FA0 0x0500 0x00040100 0x0FC9 0x002B 1111110
19:33:10.383: Login attemp (1)
19:33:10.383: netwatch up
19:33:10.383: Netwatcher thread started (tid=75757440)
19:33:10.384: connecting to localhost:12000/tcp (127.0.0.1)
E4104301050000000000BE03ADF905FFF51000000000BE03
ADF904010000000000BE03ADF904011000000000BE03ADF9
04012000000000BE03ADF904013000000000BE03ADF9
19:33:11.771: Newcamd 0: CaID=0500 admin=1 srvUA=00000000BE03ADF9 provider 040130/00000000BE03ADF9 040120/00000000BE03ADF9 040110/00000000BE03ADF9 040100/00000000BE03ADF9 FFF510/00000000BE03ADF9
19:33:11.773: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001)
19:33:11.773: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode
19:33:11.778: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001)
19:33:11.778: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode
19:33:11.779: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001)
19:33:11.779: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode
19:33:21.600: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.000)
19:33:21.600: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode
Nogen som har gode idéer til hvad der er galt eller hvad jeg kan prøve  ?

Forfatter	Besked Emne Søg Emne-funktioner Besvar Opret nyt emne Printervenlig udgave Oversæt Emne
RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Emne: Boxer SoftCam - ekspert hjælp søges! Sendt: 13-December-2009 kl. 20:33
	Jeg prøver og få en softcam løsning til boxer til og spille - men det virker ikke. Jeg er nybegynder, så der er forhåbentlig noget grundlæggende jeg har overset! Bruger en Smartgo reader sat op til Com4, og har prøvet med NewCS 1.65 i PC versionen + ACamd 0.6.1.0 + DVBViewer Pro. Min newcs.xml fil ser sådan her ud: <newCSconfig> <readers name="Phoenix"> <device> <name>Phoenix Interface</name> <type>phoenix</type> <mhz>357</mhz> <node>COM4</node> <parity>odd</parity> <reset>normal</reset> <export>Yes</export> <enabled>Yes</enabled> <blocksa>No</blocksa> <blockua>No</blockua> <blockga>No</blockga> <!-- <boxkey>0000000000</boxkey> --> <!-- <rsa>0000000000</rsa> --> <crypto-special>No</crypto-special> <PTShandshake>No</PTShandshake> <carddetect>yes</carddetect> <newcamd_port>12000</newcamd_port> <autosid>Yes</autosid> <Seca-PPV>no</Seca-PPV> <priority>round</priority> </device> </readers> <cache> <emm>20</emm> <ecm>-1</ecm> </cache> <debug> <password>NewCSpwd</password> <level>normal</level> <type>init</type> <output>console,tcp</output> <console_options>normal,init</console_options> <tcp_port>1001</tcp_port> <tcp_options>normal,init</tcp_options> </debug> <newcamdserver> <enabled>Yes</enabled> <name>newcs</name> <deskey>0102030405060708091011121314</deskey> <user> <name>User1</name> <password>Pass1</password> <au>on</au> <spider>No</spider> </user> </newcamdserver> </newCSconfig> cardclient.conf ser sådan her ud: newcamd:localhost:12000:1/0500/ffff:User1:Pass1:0102030405060708091011121314 I min promt gir NewCS.exe dette output This is NewCS 1.65 - the New CardServer by the Butter-team.. Compiled on Jan 19 2009 at 17:54:08 Reading Config file from newcs.xml TCP-log password is enabled, set to: NewCSpwd TCP-log set to simple mode level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 19:27:26 ] [ Box detect ] Windows Vista Build 7600 [ 19:27:26 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to NO [ 19:27:26 ] [ Config ] COM4 ECM priority: round [ 19:27:26 ] [ EMM Cache ] Initialising dynamic Cache [ 19:27:26 ] [ ECM Cache ] Initialising dynamic Cache [ 19:27:26 ] [ Loader ] Starting Telnet on port 1001 [ 19:27:26 ] [ Loader ] Reader type 2 on node COM4 [ 19:27:26 ] [ Phoenix ] Opening device COM4 [ 19:27:26 ] [ Phoenix ] Setting parity to ODD on node COM4 [ 19:27:26 ] [ Phoenix ] Setting 1 Stop bit on node COM4 [ 19:27:26 ] [ Phoenix ] Setting baud to 9600 [ 19:27:28 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu [ 19:27:28 ] [ ATR ] Historical bytes: [C2] z A [02] h [90] [00] [ 19:27:28 ] [ Loader ] Init Viaccess card [ 19:27:28 ] [ Phoenix ] Setting parity to ODD on node COM4 [ 19:27:28 ] [ Phoenix ] Setting 1 Stop bit on node COM4 [ 19:27:28 ] [ Phoenix ] Setting baud to 9600 [ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 0 on Provider 000000 for caid 0500 ID=0 [ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider FFF510 for caid 0500 ID=0 [ 19:27:28 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040100 for caid 0500 ID=1 [ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040110 for caid 0500 ID=2 [ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040120 for caid 0500 ID=3 [ 19:27:29 ] [ KeymaN ] Adding key BE03ADF9 type 1 on Provider 040130 for caid 0500 ID=4 [ 19:27:29 ] [ Loader ] Card 0500 on port COM4 ready [ 19:27:29 ] [ Loader ] Starting Newcamd Server on port 12000 [ 19:27:29 ] [ Newcamd ] Newcamd thread Server started on port 12000 newcamd: main loop [ 19:33:11 ] [ Newcamd:12000 ] User User1 logged in, client: Generic [ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0 [ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0 [ 19:33:11 ] [ Newcamd ] ECM -> User1 (NOT OK) 0500 0000 0FA0 [ 19:34:12 ] [ Newcamd:12000 ] User User1 logout ACamd gir dette output i DVBviewer plugin: 19:32:14.158: structloaders: registering loader keys 19:32:14.158: cardclients: registering cardclient Camd35 19:32:14.158: systems: registering CA system Cardclient, pri -15, ident 1000 19:32:14.158: structloaders: registering loader cardclient config 19:32:14.158: cardclients: registering cardclient CCcamN 19:32:14.158: cardclients: registering cardclient EmuBox03 19:32:14.158: cardclients: registering cardclient Gbox 19:32:14.158: cardclients: registering cardclient GboxN 19:32:14.158: cardclients: registering cardclient MboxN 19:32:14.158: cardclients: registering cardclient Newcamd 19:32:14.158: cardclients: registering cardclient Radegast 19:32:14.158: systems: registering CA system SC-Irdeto, pri -10, ident 1001 19:32:14.158: feature: using feature SMARTCARD 19:32:14.158: registering Irdeto smartcard (id 49726474) 19:32:14.158: systems: registering CA system SC-Seca, pri -10, ident 1002 19:32:14.158: registering Seca smartcard (id 53656361) 19:32:14.158: systems: registering CA system SC-Viaccess, pri -10, ident 1003 19:32:14.158: registering Viaccess smartcard (id 56696173) 19:32:14.158: systems: registering CA system SC-Conax, pri -10, ident 1004 19:32:14.158: registering Conax smartcard (id 436f6e78) 19:32:14.158: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005 19:32:14.158: registering Cryptoworks smartcard (id 4372576f) 19:32:14.158: systems: registering CA system SC-Nagra, pri -10, ident 1006 19:32:14.158: registering Nagra smartcard (id 4e616772) 19:32:14.158: systems: registering CA system SC-NDS, pri -10, ident 1007 19:32:14.158: registering NDS smartcard (id 56694732) 19:32:14.159: ACamd v0.6.1.0 19:32:14.159: structloaders: registering loader smartcard data 19:32:14.498: Betatunnel:CAID:1833 Provider:00000000 to CAID:1702 Provider:00000000 19:32:14.498: Engine DVB Viewer Pro 19:32:14.498: loading smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf 19:32:14.499: loaded 9 smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf 19:32:14.499: loading cardclient config from C:\Program Files\DVBViewer1\Plugins\cardclient.conf 19:32:14.500: now using protocol version 525 (cdLen=8) 19:32:14.500: hostname=localhost port=12000 emm=1 emmCaids 0500/ffff 19:32:14.500: Newcamd: username=User1 password=Pass1 key=0102030405060708091011121314 providers=none 19:32:14.500: client 'Newcamd' ready 19:32:14.500: registered systems: 19:32:14.500: SC-NDS (pri -10) 19:32:14.500: SC-Nagra (pri -10) 19:32:14.500: SC-Cryptoworks (pri -10) 19:32:14.500: SC-Conax (pri -10) 19:32:14.500: SC-Viaccess (pri -10) 19:32:14.500: SC-Seca (pri -10) 19:32:14.500: SC-Irdeto (pri -10) 19:32:14.500: ** Cardclient (pri -15) 19:32:14.500: no smartcard interface defined! 19:32:17.511: 19:32:17.536: Ch: 101 - DR1 19:32:17.536: Programm crc: 009A2FB3 19:32:17.536: PMT: ACamd_PMT.txt, search, not found PMT=0065 (AND SID=0065) 19:32:17.660: Incomming PackageSize [188] 19:32:18.088: Auto search..., not found... 19:32:18.088: 0x0065 0x0065 0x0500 0x00040100 0x0000 0x0029 1111110 19:33:01.271: 19:33:01.420: Ch: 2050 - DR Ramasjang 19:33:01.420: Programm crc: BC49119B 19:33:01.421: PMT: ACamd_PMT.txt, search, not found PMT=0802 (AND SID=07D5) 19:33:01.802: Auto search..., not found... 19:33:01.802: 0x0802 0x07D5 0x0500 0x00040100 0x0000 0x0029 1111110 19:33:09.459: 19:33:09.559: Ch: 4000 - TV 2 Charlie 19:33:09.559: Programm crc: 8BBA926A 19:33:09.559: PMT: ACamd_PMT.txt, search, not found PMT=0FA0 (AND SID=0FA0) 19:33:10.296: Auto search..., not found... 19:33:10.297: 0x0FA0 0x0FA0 0x0500 0x00040100 0x0FC9 0x002B 1111110 19:33:10.383: Login attemp (1) 19:33:10.383: netwatch up 19:33:10.383: Netwatcher thread started (tid=75757440) 19:33:10.384: connecting to localhost:12000/tcp (127.0.0.1) E4104301050000000000BE03ADF905FFF51000000000BE03 ADF904010000000000BE03ADF904011000000000BE03ADF9 04012000000000BE03ADF904013000000000BE03ADF9 19:33:11.771: Newcamd 0: CaID=0500 admin=1 srvUA=00000000BE03ADF9 provider 040130/00000000BE03ADF9 040120/00000000BE03ADF9 040110/00000000BE03ADF9 040100/00000000BE03ADF9 FFF510/00000000BE03ADF9 19:33:11.773: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001) 19:33:11.773: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode 19:33:11.778: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001) 19:33:11.778: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode 19:33:11.779: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.001) 19:33:11.779: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode 19:33:21.600: Newcamd 0: ECM [0FC9][0500/00040100] Pro (0.000) 19:33:21.600: Newcamd 0: ECM [0FC9][0500/00040100] not able to decode Nogen som har gode idéer til hvad der er galt eller hvad jeg kan prøve ?
	Still learning ...

confused Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 29-August-2006 Status: Offline Point: 2686	Sendt: 13-December-2009 kl. 21:28
	Hejsa Dit setup ligner meget noget jeg har leget med - og alt ser sådan set også rigtigt ud, bortset jo altså fra det fact at den ikke vil decode kanalerne. Prøv evt. at droppe newcs(et øjeblik) og lade acamd være både kortserver og -klient. Lige nu kører jeg med CCCam på serveren, og acamd som klient. Det var måske også en løsning. Eneste forskel er så, at hos mig handler det om Satellit, og Viasat. Spørgsmålet om den version af Viaccess som Boxer bruger, er for speciel.
	Min "videobåndoptager" kan optage mere end 10 tv kanaler samtidigt, men jeg når jo aldrig at se alle programmerne....

RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Sendt: 14-December-2009 kl. 17:14
	Hov, det glemte jeg og nævne. Jeg har prøvet ACamd som både client og server. Der fik jeg følgende dump i ACamd: 19:23:33.182: structloaders: registering loader keys 19:23:33.182: cardclients: registering cardclient Camd35 19:23:33.182: systems: registering CA system Cardclient, pri -15, ident 1000 19:23:33.182: structloaders: registering loader cardclient config 19:23:33.182: cardclients: registering cardclient CCcamN 19:23:33.182: cardclients: registering cardclient EmuBox03 19:23:33.182: cardclients: registering cardclient Gbox 19:23:33.182: cardclients: registering cardclient GboxN 19:23:33.182: cardclients: registering cardclient MboxN 19:23:33.182: cardclients: registering cardclient Newcamd 19:23:33.182: cardclients: registering cardclient Radegast 19:23:33.182: systems: registering CA system SC-Irdeto, pri -10, ident 1001 19:23:33.182: feature: using feature SMARTCARD 19:23:33.182: registering Irdeto smartcard (id 49726474) 19:23:33.182: systems: registering CA system SC-Seca, pri -10, ident 1002 19:23:33.182: registering Seca smartcard (id 53656361) 19:23:33.182: systems: registering CA system SC-Viaccess, pri -10, ident 1003 19:23:33.182: registering Viaccess smartcard (id 56696173) 19:23:33.182: systems: registering CA system SC-Conax, pri -10, ident 1004 19:23:33.182: registering Conax smartcard (id 436f6e78) 19:23:33.182: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005 19:23:33.182: registering Cryptoworks smartcard (id 4372576f) 19:23:33.182: systems: registering CA system SC-Nagra, pri -10, ident 1006 19:23:33.182: registering Nagra smartcard (id 4e616772) 19:23:33.182: systems: registering CA system SC-NDS, pri -10, ident 1007 19:23:33.182: registering NDS smartcard (id 56694732) 19:23:33.183: ACamd v0.6.1.0 19:23:33.183: structloaders: registering loader smartcard data 19:23:33.514: Betatunnel:CAID:1833 Provider:00000000 to CAID:1702 Provider:00000000 19:23:33.514: Engine DVB Viewer Pro 19:23:33.514: loading smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf 19:23:33.515: loaded 9 smartcard data from C:\Program Files\DVBViewer1\Plugins\smartcard.conf 19:23:33.515: loading cardclient config from C:\Program Files\DVBViewer1\Plugins\cardclient.conf 19:23:33.515: registered systems: 19:23:33.515: SC-NDS (pri -10) 19:23:33.515: SC-Nagra (pri -10) 19:23:33.515: SC-Cryptoworks (pri -10) 19:23:33.515: SC-Conax (pri -10) 19:23:33.515: SC-Viaccess (pri -10) 19:23:33.515: SC-Seca (pri -10) 19:23:33.515: SC-Irdeto (pri -10) 19:23:33.515: ** Cardclient (pri -15) 19:23:33.515: no smartcard interface defined! 19:23:36.515: 19:23:36.542: Ch: 101 - DR1 19:23:36.542: Programm crc: 009A2FB3 19:23:36.542: PMT: ACamd_PMT.txt, search, not found PMT=0065 (AND SID=0065) 19:23:36.571: Incomming PackageSize [188] 19:23:37.006: Auto search..., not found... 19:23:37.006: 0x0065 0x0065 0x0500 0x00040100 0x0000 0x0029 1111110 19:24:40.232: COM4: open serial port 19:24:40.295: COM4: set serial options: 9600,SM_8O1 19:24:40.301: smartcards: added serial port COM4 as port 0 (normal CD, normal RESET, CLOCK 3571200) 19:24:40.302: SmartcardWatcher thread started (tid=76014688) 19:24:40.302: 0: new card inserted 19:24:40.302: COM4: set serial options: 9600,SM_8O1 19:24:40.308: 0: reseting card 19:24:42.065: 0: indirect convention detected 19:24:42.065: 0: atr decoding TS=3f hist=7 Y1=70 TA1=18 F=372 D=0.000000 TB1=00 TC1=00 N=0 Y2=00 19:24:42.065: 0: historical: c2 7a 41 02 68 90 00 19:24:42.065: 0: historical: '.zA.h.. 19:24:42.065: 0: atr checksum not given/not required 19:24:42.065: 0: indicated wwt(T0)=1000 ms, bwt(T1)=1600 ms (at 3.5712 MHz) 19:24:42.065: 0: Init Viaccess card 19:24:42.065: COM4: wrong baudrate set to defaultCOM4: set serial options: 9600,SM_8O2 19:24:42.070: card v.unknown 19:24:42.367: card UA: 3187912185 19:24:42.724: provider FFF510 (BOXER) 19:24:43.086: provider 040100 (BOXER1) 19:24:43.451: provider 040110 (BOXER2) 19:24:43.818: provider 040120 (BOXER3) 19:24:44.180: provider 040130 (BOXER4) 19:24:44.254: 19:24:44.254: Ch: 101 - DR1 19:24:44.254: Programm crc: 009A2FB3 19:24:44.255: PMT: ACamd_PMT.txt, search, not found PMT=0065 (AND SID=0065) 19:24:44.981: Auto search..., attach to a cardclient or a smartcard... 19:24:44.981: 0x0065 0x0065 0x0500 0x00040100 0x0000 0x0029 1111110 19:25:09.536: 19:25:09.717: Ch: 4000 - TV 2 Charlie 19:25:09.717: Programm crc: 8BBA926A 19:25:09.717: PMT: ACamd_PMT.txt, search, not found PMT=0FA0 (AND SID=0FA0) 19:25:11.460: Auto search..., attach to a cardclient or a smartcard... 19:25:11.461: 0x0FA0 0x0FA0 0x0500 0x00040100 0x0FC9 0x002B 1111110 19:25:13.609: provider not found on card 19:25:13.609: SC-Viaccess 0: ECM [0FC9][0500/00040100] Pro (0.000) 19:25:13.609: SC-Viaccess 0: ECM [0FC9][0500/00040100] not able to decode 19:25:21.622: provider not found on card 19:25:21.622: SC-Viaccess 0: ECM [0FC9][0500/00040100] Pro (0.000) 19:25:21.622: SC-Viaccess 0: ECM [0FC9][0500/00040100] not able to decode 19:25:31.801: provider not found on card 19:25:31.801: SC-Viaccess 0: ECM [0FC9][0500/00040100] Pro (0.000) 19:25:31.801: SC-Viaccess 0: ECM [0FC9][0500/00040100] not able to decode 19:25:35.779: 19:25:35.834: Ch: 101 - DR1 19:25:35.834: Programm crc: 009A2FB3 19:25:35.834: PMT: ACamd_PMT.txt, search, not found PMT=0065 (AND SID=0065) 19:25:36.272: Auto search..., attach to a cardclient or a smartcard... 19:25:36.272: 0x0065 0x0065 0x0500 0x00040100 0x0000 0x0029 1111110 Men jeg ved ikke helt hvordan jeg skal tolke output ??? Får den læst kortet?
	Still learning ...

confused Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 29-August-2006 Status: Offline Point: 2686	Sendt: 14-December-2009 kl. 18:45
	Det ser jo ud som om den kan se at det er et Boxer kort : 19:24:42.367: card UA: 3187912185 19:24:42.724: provider FFF510 (BOXER) 19:24:43.086: provider 040100 (BOXER1) 19:24:43.451: provider 040110 (BOXER2) 19:24:43.818: provider 040120 (BOXER3) 19:24:44.180: provider 040130 (BOXER4)
	Min "videobåndoptager" kan optage mere end 10 tv kanaler samtidigt, men jeg når jo aldrig at se alle programmerne....

RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Sendt: 21-December-2009 kl. 13:06
	har kigget lidt på CCcam ... er lidt forviret ... Kan det kun kører på UNIX? Alt hvad jeg kan finde er noget med unix, ikke PC SW ?
	Still learning ...

confused Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 29-August-2006 Status: Offline Point: 2686	Sendt: 21-December-2009 kl. 13:09
	Øhhh godt spørgsmål - jeg har slet ikke overvejet det til Windows, da min windows altid brager ned uanset hvilken software jeg forsøger at bruge. Derfor har jeg installeret VMWare med et Ubunto image og CCCam. Redigeret af confused - 21-December-2009 kl. 13:11
	Min "videobåndoptager" kan optage mere end 10 tv kanaler samtidigt, men jeg når jo aldrig at se alle programmerne....

RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Sendt: 21-December-2009 kl. 13:42
	Suk! Men er det ikk ACamd der står for selve dekodningen - så det hjælper vel ikke og skifte NewSC ud med CCcam?
	Still learning ...

confused Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 29-August-2006 Status: Offline Point: 2686	Sendt: 21-December-2009 kl. 14:42
	CCCam er en kortserver på linie med NewCS. Acamd kan fungere som både kortserver, og -klient. Det er serveren, der laver decodningen, hvorefter koderne sendes videre til klienten.
	Min "videobåndoptager" kan optage mere end 10 tv kanaler samtidigt, men jeg når jo aldrig at se alle programmerne....

RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Sendt: 21-December-2009 kl. 15:46
	Tak for info! Har du nogle gode links til hvordan mand sætte CCcam op med VMWare/Ubunto image? Jeg kende en som har styr på det med VMWare/Ubunto - men han kender intet til CCam eller ACamd/DVBViewer.
	Still learning ...

confused Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 29-August-2006 Status: Offline Point: 2686	Sendt: 21-December-2009 kl. 18:52
	Jeg har beskrevet mit setup her : http://forum.recordere.dk/forum_posts.asp?TID=69820&KW=VIASAT+S%C5DAN&PN=1&title=viasat-p-mediecenter-sdan Jeg er dog bange for at det slet ikke kan lade sig gøre umiddelbart at bruge softcam sammen med Boxer. Det kunne være rart med en bekræftelse fra nogen som faktisk kører med den løsning ? Redigeret af confused - 21-December-2009 kl. 18:52
	Min "videobåndoptager" kan optage mere end 10 tv kanaler samtidigt, men jeg når jo aldrig at se alle programmerne....

RMortensen Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 14-November-2009 Status: Offline Point: 132	Sendt: 24-December-2009 kl. 13:23
	Så vidt jeg kan forstå på info i andre tråde, så er kører boxer Viaccess 3. I følge den her http://www.eurocardsharing.com/f78/cccam-and-cards-90860 så burde CCcam også virke med Viaccess 3. Eller er der noget jeg har misforstået? Nogen der har mulighed for og prøve?
	Still learning ...

akilleuz Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 04-Februar-2005 Sted: Denmark Status: Offline Point: 89	Sendt: 25-Juli-2011 kl. 16:43
	Hejsa, Fik i nogensinde boxer til at fungere med softcam?


Skift forum	Forum-tilladelser Du kan ikke oprette nye emner i dette forum Du kan ikke besvare indlæg i dette forum Du kan ikke slette dine indlæg i dette forum Du kan ikke redigere dine indlæg i dette forum Du kan ikke oprette afstemninger i dette forum Du kan ikke stemme i dette forum


Besvar	Side 12 >