CPU - hvor varm må den være?


   

Results for x264.exe r1913 
========================== 
Pass 1 
------ 
encoded 1442 frames, 154.97 fps, 3913.50 kb/s
encoded 1442 frames, 152.29 fps, 3913.50 kb/s
encoded 1442 frames, 155.77 fps, 3913.50 kb/s
encoded 1442 frames, 157.23 fps, 3913.50 kb/s
Pass 2 
------ 
encoded 1442 frames, 47.92 fps, 3954.56 kb/s
encoded 1442 frames, 48.48 fps, 3956.58 kb/s
encoded 1442 frames, 48.11 fps, 3955.87 kb/s
encoded 1442 frames, 48.15 fps, 3956.58 kb/s
 
System Details 
-------------- 
Processor 1   ID = 0
 Number of cores  6 (max 16)
 Number of threads 12 (max 32)
 Name   Intel Core i7 970
 Codename  Gulftown
 Specification  Intel(R) Core(TM) i7 CPU         970  @ 3.20GHz
 Technology  32 nm
 TDP Limit  130 Watts
 Core Speed  3600.5 MHz
 Multiplier x FSB 24.0 x 150.0 MHz
 Rated Bus speed  3600.5 MHz
 Stock frequency  3200 MHz
 Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES
 Northbridge   Intel X58 rev. 13
 Southbridge   Intel 82801JR (ICH10R) rev. 00
 
Memory Type   DDR3
Memory Size   12288 MBytes
Channels   Triple
Memory Frequency  750.1 MHz (2:10)
CAS# latency (CL)  9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP)  9
Cycle Time (tRAS)  24
Row Refresh Cycle Time (tRFC) 74
Command Rate (CR)  2T
Uncore Frequency  2400.3 MHz
 
DIMM #    1
 SMBus address  0x50
 Memory type  DDR3
 Module format  UDIMM
 Manufacturer (ID) Corsair (7F7F9E0000000000)
 Size   2048 MBytes
 Max bandwidth  PC3-10700H (667 MHz)
 Part number  CM3X2G1600C9      
 Number of banks  8
 Nominal Voltage  1.50 Volts
 EPP   no
 XMP   yes
 XMP revision  1.2
JEDEC timings table  CL-tRCD-tRP-tRAS-tRC @ frequency
 JEDEC #1  6.0-6-6-16-23 @ 444 MHz
 JEDEC #2  8.0-8-8-22-30 @ 592 MHz
 JEDEC #3  9.0-9-9-24-34 @ 666 MHz
XMP profile   XMP-1600
 Specification  PC3-12800
 Voltage level  1.650 Volts
 Min Cycle time  1.250 ns (800 MHz)
 Min tRP   11.25 ns
 Min tRCD  11.25 ns
 Min tWR   15.00 ns
 Min tRAS  30.00 ns
 Min tRC   50.63 ns
 Min tRFC  110.00 ns
 Min tRTP  7.50 ns
 Min tRRD  7.50 ns
 Command Rate  2T
XMP timings table  CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
 XMP #1   6.0-6-6-16-27-2T @ 533 MHz (1.650 Volts)
 XMP #2   9.0-9-9-24-41-2T @ 800 MHz (1.650 Volts)
 
M.v.h.

Forfatter	Besked Emne Søg Emne-funktioner Besvar Opret nyt emne Printervenlig udgave Oversæt Emne
Bruger udmeldt 38 Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste -- Oprettet: 21-Maj-2006 Status: Offline Point: 5	Sendt: 27-September-2011 kl. 08:23
	Results for x264.exe r1913 ========================== Pass 1 ------ encoded 1442 frames, 154.97 fps, 3913.50 kb/s encoded 1442 frames, 152.29 fps, 3913.50 kb/s encoded 1442 frames, 155.77 fps, 3913.50 kb/s encoded 1442 frames, 157.23 fps, 3913.50 kb/s Pass 2 ------ encoded 1442 frames, 47.92 fps, 3954.56 kb/s encoded 1442 frames, 48.48 fps, 3956.58 kb/s encoded 1442 frames, 48.11 fps, 3955.87 kb/s encoded 1442 frames, 48.15 fps, 3956.58 kb/s System Details -------------- Processor 1 ID = 0 Number of cores 6 (max 16) Number of threads 12 (max 32) Name Intel Core i7 970 Codename Gulftown Specification Intel(R) Core(TM) i7 CPU 970 @ 3.20GHz Technology 32 nm TDP Limit 130 Watts Core Speed 3600.5 MHz Multiplier x FSB 24.0 x 150.0 MHz Rated Bus speed 3600.5 MHz Stock frequency 3200 MHz Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES Northbridge Intel X58 rev. 13 Southbridge Intel 82801JR (ICH10R) rev. 00 Memory Type DDR3 Memory Size 12288 MBytes Channels Triple Memory Frequency 750.1 MHz (2:10) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Row Refresh Cycle Time (tRFC) 74 Command Rate (CR) 2T Uncore Frequency 2400.3 MHz DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) Corsair (7F7F9E0000000000) Size 2048 MBytes Max bandwidth PC3-10700H (667 MHz) Part number CM3X2G1600C9 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.2 JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-16-23 @ 444 MHz JEDEC #2 8.0-8-8-22-30 @ 592 MHz JEDEC #3 9.0-9-9-24-34 @ 666 MHz XMP profile XMP-1600 Specification PC3-12800 Voltage level 1.650 Volts Min Cycle time 1.250 ns (800 MHz) Min tRP 11.25 ns Min tRCD 11.25 ns Min tWR 15.00 ns Min tRAS 30.00 ns Min tRC 50.63 ns Min tRFC 110.00 ns Min tRTP 7.50 ns Min tRRD 7.50 ns Command Rate 2T XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-6-6-16-27-2T @ 533 MHz (1.650 Volts) XMP #2 9.0-9-9-24-41-2T @ 800 MHz (1.650 Volts) M.v.h.

kfcofir Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 19-Juni-2006 Sted: Holbæk Status: Offline Point: 635	Sendt: 27-September-2011 kl. 08:46
	Ham her : fra hwt.dk vil også gerne nå de 4000 mhz uden at give Extra volt.. Target CPU Frequency 4000 MHz Target DRAM Frequency ??MHz LN2 Mode [Disabled]* QPI Loadline Calibration [Enabled]* Sync Mode [] AI Overclock Tuner [Manual] OC From CPU level Up [Auto] CPU Ratio Setting [23] CPU Turbo Power Limit [Disabled] >CPU Configuration---------------------------- CPU Ratio Setting [23] C1E Support [Disabled] Hardware Prefetcher [Disabled] Adjacent Cache Line Prefetcher [Disabled] Intel(R) Virtualiyation Tech [Disabled] CPU TM Function [Disabled] Execute Disable Bit [Disabled] Intel(R) HT Technology [Enabled] Active Processor Cores [1] A20M [Disabled] Intel(R) SpeedStep(TM) Tech [Disabled] Intel(R) C-STATE Tech [??] C State package limit setting [??] ---------------------------------------------- BCLK Frequency [174] PCIE Frequency [100] DRAM Frequency [?] Laveste?? UCLK Frequency [?] Laveste?? QPI Link Data Rate [?] Laveste? Memory Configuration Protect [Enabled] >DRAM Timing Control-------------------------- CAS# Latency [] RAS# to CAS# Delay [] RAS# PRE Time [] RAS# ACT Time [] RAS# to RAS# Delay [] REF Cycle Time [] WRITE Recovery Time [] READ to PRE Time [] FOUR ACT WIN Time [] Back-To-BackCAS# Delay [] Timing Mode [] Round Trip Latency on CHA [] Round Trip Latency on CHB [] Round Trip Latency on CHC [] WRITE To READ Delay(DD) [] WRITE To READ Delay(DR) [] WRITE To READ Delay(SR) [] READ To WRITE Delay(DD) [] READ To WRITE Delay(DR) [] READ To WRITE Delay(SR) [] READ To READ Delay(DD) [] READ To READ Delay(DR) [] READ To READ Delay(SR) [] WRITE To WRITE Delay(DD) [] WRITE To WRITE Delay(DR) [] WRITE To WRITE Delay(SR) [] ---------------------------------------------- CPU Differential Amplitude [800 MV] CPU Clock Skew [auto] IOH Clock Skew [auto] ------------ Extreme Engine Digi+ ------------ Digi+ PWR Mode [T-power] PWR Volt. Control [Auto] Load-Line Calibration [Enabled 100%] CPU Voltege OCP [Enabled] CPU PWM Frequency [1000Hz] Extreme OV [Enabled] Extreme OC [Auto] CPU Voltage [1,25] CPU PLL Voltage [1,55] Er det nok? QPI/DRAM Core Voltage [1,38] DRAM Bus Voltage [1,6] >DRAM REF Voltages---------------------------- DRAM DATA REF Voltage on CHA [] DRAM CTRL REF Voltage on CHA [] DRAM DATA REF Voltage on CHB [] DRAM CTRL REF Voltage on CHB [] DRAM DATA REF Voltage on CHC [] DRAM CTRL REF Voltage on CHC [] ---------------------------------------------- IOH Voltage [1,17] IOH PCIE Voltage [1,51] ICH Voltage [1,15] ICH PCIE Voltage [1,51] ---------- Spread Spectrum Control ----------- CPU Spread Spectrum [Disabled] DRAM Spread Spectrum [Disabled] Husk jeg går efter lidt ekstra ydelse med så lidt ekstra vcore og dermed varme som muligt da jeg kun kører på luft. http://hwt.dk/Forum/315181/OC-af-I7--970
	En masse HiFi ( Bip biiiip) jeg ikke har tid til at sætte mig ind i :O(

kfcofir Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 19-Juni-2006 Sted: Holbæk Status: Offline Point: 635	Sendt: 27-September-2011 kl. 12:02
	Prøvet med Multi på 25x & FSB på 160 og cpu volt på 1.30, det gav denne Results for x264.exe r1913 ========================== Pass 1 ------ encoded 1442 frames, 170.27 fps, 3913.50 kb/s encoded 1442 frames, 170.81 fps, 3913.50 kb/s encoded 1442 frames, 171.97 fps, 3913.50 kb/s encoded 1442 frames, 170.41 fps, 3913.50 kb/s Pass 2 ------ encoded 1442 frames, 50.82 fps, 3957.02 kb/s encoded 1442 frames, 51.94 fps, 3955.39 kb/s encoded 1442 frames, 50.67 fps, 3957.20 kb/s encoded 1442 frames, 51.75 fps, 3954.78 kb/s System Details -------------- Name Intel Core i7 970 product System Product Name Codename Gulftown Specification Intel(R) Core(TM) i7 CPU 970 @ 3.20GHz Specification PC3-16000 Specification PC3-16000 Specification PC3-16000 Core Stepping B1 Technology 32 nm Stock frequency 3200 MHz Core Speed 4001.2 MHz Northbridge Intel X58 rev. 13 Southbridge Intel 82801JR (ICH10R) rev. 00 CAS# latency (CL) 6.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 6 Cycle Time (tRAS) 24 Command Rate (CR) 2T Command Rate 1T Command Rate 1T Command Rate 1T Memory Frequency 922.0 MHz (2:10) Memory Type DDR3 Memory Size 6144 MBytes Channels Triple Windows Version Microsoft Windows 7 (6.1) Ultimate Edition Service Pack 1 (Build 7601) Number of processors 1 Number of threads 12 Number of threads 12 (max 32) L2 cache 6 x 256 KBytes, 8-way set associative, 64-byte line size Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES Package (platform ID) Socket 1366 LGA (0x1) Temperature 0 27°C (80°F) [0x1B] (SYSTIN) Temperature 1 28°C (81°F) [0x37] (CPUTIN) Temperature 2 37°C (97°F) [0x49] (AUXTIN) Temperature 0 55°C (130°F) [0x37] (SB) Temperature 1 63°C (145°F) [0x3F] (NB)
	En masse HiFi ( Bip biiiip) jeg ikke har tid til at sætte mig ind i :O(

Bruger udmeldt 38 Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste -- Oprettet: 21-Maj-2006 Status: Offline Point: 5	Sendt: 27-September-2011 kl. 14:44
	Nu tænker jeg om den nye type standard Intel-køler måske er bedre, end den CoolerMaster jeg kører med? Det kunne selvfølgelig være være at afprøve - også om den overhovedet kan få plads i kabinettet? M.v.h.


Skift forum	Forum-tilladelser Du kan ikke oprette nye emner i dette forum Du kan ikke besvare indlæg i dette forum Du kan ikke slette dine indlæg i dette forum Du kan ikke redigere dine indlæg i dette forum Du kan ikke oprette afstemninger i dette forum Du kan ikke stemme i dette forum


Besvar	Side <12