Oppo BDP-83SE, nu er der to udgave af (som nok er den samme udgave, når det komme til stykke) en fra NuForce,
Oppo BDP-83SE NuForce Edition og en fra Oppo, Oppo BDP-83SE så det lader til at Oppo har lytte til kritikeren der har være at de analog udgang og den indbygget strømforsyning på Oppo BDP-83.
Oppo BDP-83SE NuForce Edition OPPO BDP-83SE NuForce Edition
MSRP $1295.00
Shipping November 18.
Extracting
high-quality audio from Blu-ray players is problematic. The HDMI signal
interleaves video and audio data which, upon decoding, produces an
inherent jitter as high as 7nanoseconds (For comparison, a good CD
player’s jitter is in the picosecond range). In practical terms, it is
difficult to properly decode HDMI audio without employing extensive
reclocking circuits, thus pushing up the cost of a good HDMI audio
pre-processor.
The simplest way to improve analog audio performance is at the source.
The Oppo BDP-83SE player incorporates ESS Technology’s state-of-the-art
Sabre DAC, widely acknowledged as one of the industry’s best. The 7.1
multi-channel unit employs a single 8-channel Sabre DAC. The stereo
channels’ dedicated Sabre DAC is achieved by stacking four DACs per
left and right channel for utmost transparency and dynamic range.
The Nuforce Edition elevates performance yet further by replacing
critical analog components with the high-grade equivalents NuForce uses
in its high-end audio components. The result is a better power supply
and optimized analog signal paths. As always, the proof is in the
listening. The improvements in stereo (CD, SACD, DVD-A, BD Audio), and
L/R/C movie outputs are clearly audible.
The standard Oppo BDP-83SE offers exemplary audio performance. The
Nuforce Edition goes a step further in transparency, dynamics, and
detail retrieval. As is typical of all Nuforce products, these benefits
relate directly to our high-end product line in the preservation of musical truth.Oppo BDP-83SE Special EditionFeatures |
The OPPO BDP-83 Special Edition Blu-ray Disc Player is an exciting
upgrade based on the highly acclaimed BDP-83. Already well known for
its exceptional audio and video performance, the BDP-83 is upgraded
with an all new analog audio stage and improved power supply to become
the Special Edition. Designed for the discerning audio enthusiast, the
OPPO BDP-83 Special Edition Blu-ray Disc Player delivers an
exceptionally wide dynamic range, ultra low distortion, accurate sound
stage and jitter-free music clarity via its dedicated stereo and 7.1ch
analog audio output.
The OPPO BDP-83 Special Edition uses the state-of-the-art Sabre32 family of Digital-to-Analog Converters (DAC) from ESS Technology. The Sabre32
family is known as one of the industry's highest performance audio DACs
and are often found in high-end audiophile and professional equipments.
The OPPO BDP-83 Special Edition uses an 8-channel Sabre Premier
(ES9006) DAC chip for its 7.1 multi-channel output. The dedicated
stereo output uses another 8-channel Sabre32 Ultra (ES9016) DAC chip by stacking 4 DACs for each of the Left and Right channels to achieve even greater audio performance.
Just like the BDP-83 it is based on, the OPPO BDP-83 Special
Edition is a Profile 2.0 Blu-ray player featuring bit-stream and full
decoding capability for high resolution audio tracks such as Dolby
TrueHD and DTS-HD Master Audio. Designed for both home theater viewers
and music listeners, it plays DVD-Video, DVD-Audio, Super Audio CD
(SACD) and standard CD with excellent video and audio performance in
addition to Blu-ray Discs. For a detailed list of features, please
refer to the BDP-83 Features and Specifications page.
OPPO Digital recommends the BDP-83 Special Edition to customers who
primarily use the analog audio output to connect to either a dedicated
stereo or a multi-channel surround system. For customers who primarily
use the HDMI output to connect to an A/V receiver or directly to a
TV/projector, and for customers who primarily use the optical/coaxial
digital audio output, the standard BDP-83 is recommended.
|
Specifications
Designs and specifications are subject to change without notice.
Disc Types* |
BD-Video, DVD-Video, AVCHD, DVD-Audio, SACD, CD, HDCD, Kodak Picture CD
CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE |
BD Profile |
BD-ROM Version 2 Profile 2 (also compatible with Profile 1 Version 1.0 and 1.1) |
Internal Storage |
1GB (Actual available storage varies due to system usage) |
Output |
Analog Audio: 7.1ch or 5.1ch, stereo
Digital Audio: Coaxial, Optical
HDMI Audio: Stereo, up to 7.1ch high-resolution PCM, up to 5.1ch DSD,
bitstream or LPCM conversion of Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, DTS-HD High Resolution Audio, and DTS-HD Master
Audio.
Analog Video: Composite, Component Video (Y/Pb/Pr, 480i/480p,
720p/1080i available for non-restricted content only)
Digital Video: HDMI with HDCP (NTSC:
480i/480p/720p/1080i/1080p/1080p24, PAL
576i/576p/720p/1080i/1080p/1080p24) |
Video Characteristics |
Composite Video Amplitude: 1.0Vp-p (75Ω)
Component Video: Y: 1.0Vp-p (75Ω), Pb/Pr: 0.7Vp-p (75Ω)
|
Audio Characteristics** |
Frequency: Stereo 20Hz - 44kHz (±0.2dB), 20kHz - 96kHz (±1.1dB)
7.1CH 20Hz - 44kHz (±0.4dB)
Signal-to-Noise Ratio: >117dB (A-weighted, auto-mute off)
THD+N: < 0.002% (1kHz at 0dBFS, 20kHz LPF)
Dynamic Range: >104dB (24-bit unweighted)
Channel Separation: >106dB (24-bit unweighted) |
General Specification |
Power Supply: ~ 100V - 240V, 50/60Hz AC
Power Consumption: 35W (0.5W Standby)
Dimensions: 430mm x 336mm x 77mm, 16-7/8 x 13-1/4 x 3 inches
Mass: 5.1kg / 11.2 lbs
|
Operating Temperature |
5°C - 35°C
41°F - 95°F
|
Operating Humidity |
15% - 75%
No condensation
|
* Compatibility with user-encoded contents or user-created discs is
on a best-effort basis with no guarantee due to the variation of media,
software and techniques used.
**Nominal specification. |
Redigeret af Startrek - 11-November-2009 kl. 00:32