helt galt med WD TV

Hey igen

Jeg bliver nød til at ha noget hjælp inde at jeg brander helt af arr

jeg har wd tv liver med _WDLXTV_LIVE_ -0.4.1.9-6  og self har jeg MSheetLive til og det har også virker find ind til nu

jeg har MSheetLive STD og når jeg går ind i mappe med film viser den 3 ting

billede
Templates

Film(selv filmen)

det mærkelige er så når jeg besvære mig hen over  billede, Templates, og til sidst film film så kommer den op som den skulle  med at vise  den i alm STD men ikke føre at jeg gå ind i mappe og så hen over de  filer og så kommer den op

har også teste det i MSheetLiveTEST gøre det sammen så det mår være mit setup der laver fejl et og anden sted men HVOR ????

nogen der har en ide om hvad det kan være det driller


sådan ser min S00custom-options ud::::

#!/bin/sh

##

## in this file you can enter commands that will be executed with the init.d scripts

## typos / syntax errors will prevent the osd from booting

## this file is only executed if it is at the root of an attached device at boot

##

## this file is executed when the wdtv starts/boots up AND when /usr/sbin/resume is called

## so operations placed here should not be adversely affected by multiple execution

## the above applies if you utilize /conf/S00user-script as well

##

## several examples are provided below, uncomment (delete #) them to use

##

## config_tool commands only need to be executed _once_ then they can be re-commented

##

 

## change background image between 3 stock options

##

## original background:

#config_tool -c BACKGROUND_IMAGE=original_bg.jpg

## eM82's backdrop background:

#config_tool -c BACKGROUND_IMAGE=eM82_bg.jpg

## wood panel (default) background:

#config_tool -c BACKGROUND_IMAGE=villa_bg.jpg

## some random location (absolute)

#config_tool -c BACKGROUND_IMAGE=/tmp/media/usb/some/random/location.jpg

 

## change list view to 4/6/8/11 entries

#config_tool -c LISTNUM=4

#config_tool -c LISTNUM=6

#config_tool -c LISTNUM=8

#config_tool -c LISTNUM=10   (default)

#config_tool -c LISTNUM=11

#config_tool -c LISTNUM=12

 

## change video thumb view to various amounts of thumbs

#config_tool -c THUMBRESO=120x160      # 21

#config_tool -c THUMBRESO=150x200      # 12

#config_tool -c THUMBRESO=163x245      # 8   (default)

#config_tool -c THUMBRESO=180x240      # 10

#config_tool -c THUMBRESO=225x300      # 4

#config_tool -c THUMBRESO=240x360      # 4

 

## change music/photo thumb view to 10/15 thumbs

#config_tool -c GENTHUMBS=10           # 10 

#config_tool -c GENTHUMBS=15           # 15   (default)

 

## change video info overlay

## ( for subtitle viewing during pause/timing/etc)

## requires reboot after change

## upper ~60%

#config_tool -c VIDEO_INFO_BAR=2

## top (warning: options bar covers up info overlay with setting 3)

#config_tool -c VIDEO_INFO_BAR=3

 

 

## change subtitle size to one not menu-selectable

#config_tool -c SUBTITLE_FONT_SIZE=44

#config_tool -c SUBTITLE_FONT_SIZE=48

#config_tool -c SUBTITLE_FONT_SIZE=50

#config_tool -c SUBTITLE_FONT_SIZE=52

#config_tool -c SUBTITLE_FONT_SIZE=56

#config_tool -c SUBTITLE_FONT_SIZE=60

#config_tool -c SUBTITLE_FONT_SIZE=64

#config_tool -c SUBTITLE_FONT_SIZE=68

#config_tool -c SUBTITLE_FONT_SIZE=72

#config_tool -c SUBTITLE_FONT_SIZE=76

#config_tool -c SUBTITLE_FONT_SIZE=80

 

## permanently set timezone

## http://www.timeanddate.com/library/abbreviations/timezones/

## below is for Pacific North America

#config_tool -c TIMEZONE=PST8PDT

 

## permanently set hostname

#config_tool -c DEVICE_NAME=SomeHostName

 

## use custom USB slot icons

#config_tool -c USBICONS='yes'

 

## disable telnet server

#config_tool -c TELNETD=OFF

 

## disable pure-ftpd server

#config_tool -c FTPD=OFF

 

## disable dropbear ssh server

#config_tool -c SSHD=OFF

 

## disable keep alive of ethernet during WDTV Live standby

#config_tool -c DISABLE_ETHERNET_ON_STANDBY=YES

 

## enable NTP (network time)

## if you use a wireless adapter you will also have to set WIRELESS_DRIVER

#### *** ONLY with wireless: NTP adds ~20s to the initial boot of the device ***

#### *** due to the bringing up and acquisition of wireless network address  ***

## -- if NTP fails because of slow address acquire you can increase delay to NTP_DELAY

#config_tool -c NTP=ON

 

## custom NTP server

#config_tool -c NTPSERVER=pool.ntp.org

 

## NTP delay is seconds (in case of info bar disappearing)

#config_tool -c NTP_DELAY=0

 

## to set NTP with wireless adapters:

## (choose the proper one)

#config_tool -c WIRELESS_DRIVER=rt2870sta

#config_tool -c WIRELESS_DRIVER=rt3070sta

#config_tool -c WIRELESS_DRIVER=rt3572sta

 

## Disable mt-daapd digital audio server (saves ~10MB ram)

#config_tool -c MT-DAAPD=OFF

 

## Disable lighttpd webserver (default enabled)

#config_tool -c LIGHTTPD=OFF

 

## Disable online-delayer (in case of stalled network detection)

## or because nzbget / Deluge / net.mounts won't execute

#config_tool -c ONLINEDELAYER=OFF

 

## power actions are executed when the OSD is suspended/resumed

## ***NOT*** executed when your wdtv live comes on from cold boot / power cycle

## executed when:

## -----the wdtv live goes into standby via remote

## -----the wdtv live wakes up from suspend via remote

## --use S00custom-options or S00user-script for actions that happen at boot

## *** DO NOT EXECUTE usb.power.on OR usb.power.off IN ETHERNET ACTIONS *** SEE USB_POWER_OFF setting ***

## [you may have number actions which are executed in order]

##

#config_tool -c POWER_UP_ACTION='logger -t "power_up_action" "I am doing something"

#config_tool -c POWER_UP_ACTION20='sleep 5; ether-wake -b xx:xx:xx:xx:xx:xx; sleep 10; /etc/init.d/S90net.mounts start'

#config_tool -c POWER_DOWN_ACTION='logger -t "power_down_action" "the OSD has been suspended!"'

 

##Enable/Disable Samba Windows share server (default: OFF)

##ON:

#config_tool -c ENABLE_SAMBA_SHARE=1

##OFF:

#config_tool -c ENABLE_SAMBA_SHARE=0

 

##Change SMB resolve order to 'proper' order

## YMMV

##this MUST contain either valid settings or be blank

##stock/official firmware order:

#config_tool -c SMB_RESOLVEORDER='bcast lmhosts wins host'

##proper/corrected order:

#config_tool -c SMB_RESOLVEORDER='lmhosts host wins bcast'

 

##Change Samba share export to not allow guest (anonymous) mounting

##smbpasswd is stored in /conf

#####to set Samba password for user root, ssh in and enter a password after you execute:

#####smbpasswd -c /tmp/smb2.conf -a root

#config_tool -c SMB_NOGUEST=ON

 

##Disable/enable Samba exported shares on standby (default: ON)

#config_tool -c SMB_STANDBY=OFF

 

##Disable/enable Samba auto export mode (default: ON)

#config_tool -c SMBD_AUTO=OFF

 

##Enable NFSD kernel NFS server (default: OFF)

#config_tool -c NFSD=ON

 

##Enable NFSD auto export mode (default: OFF)

## (requires NFSD_AUTO_DEFAULT)

## (overrides /conf/exports)

#config_tool -c NFSD_AUTO=ON

 

##NFSD auto export mode default setting

#config_tool -c NFSD_AUTO_DEFAULT='192.168.0.234(rw,async,no_subtree_check) 192.168.0.199(rw,async,no_subtree_check)'

 

##turns off 5V to USB Bus on standby (when you press power off on remote)

## this action is prevented by the following:

## - root.bin active

## - OSD Theme active

## - Optware active

## - app.bin active

## - Deluge or NZBget enabled

#config_tool -c USB_POWER_OFF=1

 

 

##extra NLS / codepage packages

##

##NLS packages (default utf8)

#config_tool -c IOCHARSET=utf8

#config_tool -c IOCHARSET=ascii

#config_tool -c IOCHARSET=euc-jp

#config_tool -c IOCHARSET=iso8859-13

#config_tool -c IOCHARSET=iso8859-14

#config_tool -c IOCHARSET=iso8859-15

#config_tool -c IOCHARSET=iso8859-2

#config_tool -c IOCHARSET=iso8859-3

#config_tool -c IOCHARSET=iso8859-4

#config_tool -c IOCHARSET=iso8859-5

#config_tool -c IOCHARSET=iso8859-6

#config_tool -c IOCHARSET=iso8859-7

#config_tool -c IOCHARSET=iso8859-9

#config_tool -c IOCHARSET=koi8-r

#config_tool -c IOCHARSET=koi8-ru

#config_tool -c IOCHARSET=koi8-u

 

##codepage packages (default cp437)

#config_tool -c CODEPAGE=cp1250

#config_tool -c CODEPAGE=cp1251

#config_tool -c CODEPAGE=cp1255

#config_tool -c CODEPAGE=cp437

#config_tool -c CODEPAGE=cp737

#config_tool -c CODEPAGE=cp775

#config_tool -c CODEPAGE=cp850

#config_tool -c CODEPAGE=cp852

#config_tool -c CODEPAGE=cp855

#config_tool -c CODEPAGE=cp857

#config_tool -c CODEPAGE=cp860

#config_tool -c CODEPAGE=cp861

#config_tool -c CODEPAGE=cp862

#config_tool -c CODEPAGE=cp863

#config_tool -c CODEPAGE=cp864

#config_tool -c CODEPAGE=cp865

#config_tool -c CODEPAGE=cp866

#config_tool -c CODEPAGE=cp869

#config_tool -c CODEPAGE=cp874

#config_tool -c CODEPAGE=cp932

#config_tool -c CODEPAGE=cp936

#config_tool -c CODEPAGE=cp949

#config_tool -c CODEPAGE=cp950

 

config_tool-c MSHEETMODE=std

config_tool-c VIDMSHEET=ON

config_tool-c GENMSHEET=ON

config_tool-c LISTMSHEET=ON