MCE Fjernbetjening - recordere.dk forum

Hej John

Håber dette hjælper: (Bemærk, at din remote skal have en separat knap kaldet "TV" i øverste venstre hjørne, for at være programmérbar)

Using the Remote Control Learning Functionality

The TV, VOL +, and VOL – buttons on the remote control for Media Center PC can "learn" IR commands from other remote controls. This feature lets you use the TV button to turn on your TV and the VOL + and VOL - buttons to adjust the volume
on your TV or another device, such as an audio receiver.

• By default, the VOL + and VOL - buttons on the remote control for Media Center PC control the system volume on your computer, and the TV button has no command assigned to it until it "learns" one.
• Do not perform this procedure in bright natural or artificial light.

To program buttons on the remote control by using the learning feature:

1) Place the remote control for Media Center PC head to head (2 to 3 inches apart)with the remote control from which it is learning.

2) On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off

(2 seconds).

The remote is now in learning setup mode.

3) On the remote control for Media Center PC, press and release the TV, VOL +, or VOL – button, depending on which command you want it to learn.

The remote control for Media Center PC lights blink once to confirm the selection.

4) On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn.

The remote control for Media Center PC lights blink twice to confirm the selection.

If the remote did not learn the command, the lights blink quickly four times. To try again, repeat steps 1 through 4.

5) Repeat steps 1 through 4 for the other buttons that can learn commands.

To restore the default remote control settings

1) Press and hold the DVD MENU button and LEFT navigation button at the same time until the remote control for Media Center PC lights turn off.

2) Press the OK button.

The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL + and VOL – buttons will adjust the Media Center PC system volume.

If the default settings were not restored, the lights blink quickly four times. To try again, repeat steps 1 and 2.

Forfatter	Besked Emne Søg Emne-funktioner Besvar Opret nyt emne Printervenlig udgave Oversæt Emne
jtornh Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Ny bruger Oprettet: 06-Oktober-2005 Status: Offline Point: 8	Emne: MCE Fjernbetjening Sendt: 06-Oktober-2005 kl. 17:32
	Hej Jeg har en MCE maskine med en microsoft fjernbetjening. Der er på fjernbetjeningen en knap, der kan programmeres til at tænde og slukke for fjernsynet. Jeg har desværre glemt hvordan det gøres. Er der en venlig sjæl der kan hjælpe. Jeg har iøvrigt idag modtaget min danske version af MCE og glæder mig til at installere den i aften. Med venlig hilsen John Tornhøj

JorgenR Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Junior bruger Oprettet: 18-Maj-2004 Sted: Denmark Status: Offline Point: 37	Sendt: 06-Oktober-2005 kl. 20:39
	Hej John Håber dette hjælper: (Bemærk, at din remote skal have en separat knap kaldet "TV" i øverste venstre hjørne, for at være programmérbar) Using the Remote Control Learning Functionality The TV, VOL +, and VOL – buttons on the remote control for Media Center PC can "learn" IR commands from other remote controls. This feature lets you use the TV button to turn on your TV and the VOL + and VOL - buttons to adjust the volume on your TV or another device, such as an audio receiver. • By default, the VOL + and VOL - buttons on the remote control for Media Center PC control the system volume on your computer, and the TV button has no command assigned to it until it "learns" one. • Do not perform this procedure in bright natural or artificial light. To program buttons on the remote control by using the learning feature: 1) Place the remote control for Media Center PC head to head (2 to 3 inches apart)with the remote control from which it is learning. 2) On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off (2 seconds). The remote is now in learning setup mode. 3) On the remote control for Media Center PC, press and release the TV, VOL +, or VOL – button, depending on which command you want it to learn. The remote control for Media Center PC lights blink once to confirm the selection. 4) On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn. The remote control for Media Center PC lights blink twice to confirm the selection. If the remote did not learn the command, the lights blink quickly four times. To try again, repeat steps 1 through 4. 5) Repeat steps 1 through 4 for the other buttons that can learn commands. To restore the default remote control settings 1) Press and hold the DVD MENU button and LEFT navigation button at the same time until the remote control for Media Center PC lights turn off. 2) Press the OK button. The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL + and VOL – buttons will adjust the Media Center PC system volume. If the default settings were not restored, the lights blink quickly four times. To try again, repeat steps 1 and 2.

HTPC Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Guld medlem Oprettet: 17-August-2005 Sted: Denmark Status: Offline Point: 629	Sendt: 06-Oktober-2005 kl. 20:55
	Hele brugemanualen kan downloades her: http://www.inet.se/pdf/9122093.pdf Getting Started Remote Control and Receiver for Media Center PC with Windows® For distribution only with a new computer 0804 Part No. X10-72473-02 Der kan du også finde ovenstående afsnit postet af JorgenR

jtornh Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Ny bruger Oprettet: 06-Oktober-2005 Status: Offline Point: 8	Sendt: 06-Oktober-2005 kl. 21:01
	Hej Tak til jer begge 2 for svar. Med venlig hilsen John Tornhøj


Skift forum	Forum-tilladelser Du kan ikke oprette nye emner i dette forum Du kan ikke besvare indlæg i dette forum Du kan ikke slette dine indlæg i dette forum Du kan ikke redigere dine indlæg i dette forum Du kan ikke oprette afstemninger i dette forum Du kan ikke stemme i dette forum