nyeste onkyo firmware

Her er en liste over de nyeste onkyo firmware , hvis nogle var nysgerrige

FIRMWARE Latest
TX-NR906 Main Version 1.06 HDMI Version 1.00
Remarks: For unstable output based on 576i input (PAL), this FW and complicated hardware modification are necessary.

TX-SR876 Main Version 1.06 HDMI Version 1.00
Remarks: For unstable output based on 576i input (PAL), this FW and complicated hardware modification are necessary.

TX-SR806 Main Version 1.05 HDMI Version information not found.
Remarks: Change in factory work.

TX-SR706 Main Version 1.05 HDMI Version information not found.
Remarks: Change in factory work.

TX-SR606 Main Version 1.03 HDMI Version information not found.
Remarks: Mainly small bug fixes)
While CEC's PowerControl was enabled, APOWER would still remain high even Protection mode was activated.
When TV was turned on by Remote Control with CEC ready in 606 and Viera PZ800,
the volume of 606 could not be changed by Remote Controller.

TX-NR905 Main Version 1.09 HDMI Version 1.02 (Special)
Remarks: This version is effective only for DTR-8.8 with speaker settings set by AudysseyPro.

TX-SR875 Main Version 1.09 HDMI Version 1.02 (Special)
Remarks: slightly longer muting time as a measure against noise in Blu-ray disc "Golden Compass".
This is really rare case. Update should be done only for Blu-ray disc "Golden Compass".

TX-SR805 Main Version 1.08 HDMI Version 1.02 (Special)
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown. In this case,
unplug the AC cord and plug it again. S/N Marking: "S". Service Bulletin No.08001

TX-SR705 Main Version 1.06 HDMI Version 1.02 (Special)
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown. In this case,
unplug the AC cord and plug it again. S/N Marking: "S". Service Bulletin No.08001

TX-SR605 Main Version 1.05 HDMI Version 1.02 (Special)
Remarks: When powered on just after upgrade, "E2PROM ERROR" will be shown. In this case,
unplug the AC cord and plug it again. S/N Marking: "S". Service Bulletin No.08001

---
HDMI Version 1.02 (Special):
With HDMI connection between TV, AV Receiver, and Source device,
sound could be interrupted when TV is off.
This depends on the connected devices and is not a
real problem but can be prevented by loading this new FW.

TX-SR706 Main Version 1.05 HDMI Version information not found. Remarks: Change in factory work.

Hvad betyder:  HDMI Version information not found?

og

hvad betyder: Remarks: Change in factory work.?