Firmware til WD20EADS diske

 

klip deres slutsvar

------

Thank you for contacting Western Digital Customer Service and Support.

We are unaware that the situation you are referring to, can actually cause any errors of malfunctions on the drives and/or RAID.

The difference of spinup time is not significant to take any action and should not interfere with the performance of the drive.

Should you have any issues with your drives in the future, Western Digital will replace then under your warranty policy.

I hope that we have met your expectations today and that you are satisfied with our service. If you have any further questions, please reply to this email and we will be happy to assist you further.

-------

 

mit svar 2 til dem.

Hi! thanks for the reply, the harddrives are mounted in a Raid 5 setup
> and are formatted in ext3, i am not getting any errors and the smart
> info on each drive gives me no faults, i am only asking this because
> the load cycle compared with my 4 x 1tb wd ears drives where much
> higher for the new discs, and i have read on the internet that this is
> not so good, and i was thinking perhaps there is a firmware problem
> with this type of discs in a raid 5 setup. best regards

------------------

 

 

mit spørgsmål til dem 1

I have a synology NAS ds409+ firmware DSM 2.2-0965 with 4 WD20EADS which i bought since they where at synology´s combatabilitylist. however af some time i think the load cycle and spinuptime is climbing much fast than my old disks, is the harddrives faulty or what is wrong?.

I have enclosed the information on each disc + smart information for each harddrive for you to evaluate and recommend what to do.

The harddisks are bought locally at www.shg.dk here in Denmark.

Please let me know what you think.

--------

 

deres svar på 1

Thank you for contacting Western Digital Customer Service and Support.

Please accept our apologies for the delayed response and any inconvenience this situation may have caused.

Please be so kind to provide information concerning the RAID type and how the drives are setup.

Do you have any error messages coming up? If yes, please send screenshots.

Regarding the synology NAS, we will not be able to assist you if the we come to realize that the issue can/may be caused by the casing it self, as we are not the manufacturer.

I hope that we have met your expectations today and that you are satisfied with our service. If you have any further questions, please reply to this email and we will be happy to assist you further.

 

WD20EADS er OK ifølge QNAP's compability liste.

Det er WD15EADS samt WD10EADS som de fraråder.

Eneste note på WD20EADS er:

Note8
For improved stability, please update your NAS firmware to v3.1.2 Build1001 or later. There is known performance issue with WD15EADS-00P8B0 and WD10EADS-00P8B0. These two HDDs are not suggested to use with QNAP NAS.

Jeg har selv to WD20EADS i min TS219P og alt funker (endnu) fint :-)

 

Så lad nu være med at "skræmme" ;-), med mindre du har nogle informationer jeg ikke ligger inde med, og som ikke står på QNAP's hjemmeside (eller som jeg har overset)