Antal timer på Pana G20 og andre pana modeller

Her er en måde at holde styr på, hvor mange timer ens Panasonic G20 har kørt
(Virker på følgende modeller  X24 - C2 - U2 - S2 - G20 - G25 - VT20 - VT25)

På eget ansvar, hvis man vil ind og checke

Panasonic
Consumer Models
X24 / C2 / U2 / S2 / G20 / G25 / VT20 / VT25

Press and hold the {VOL -} button ON THE PLASMA.
Then press the {INFO} button on the remote control 3 times.

The Service Menu will be displayed with the following options:

ADJUST {Picture Adjustment}
WB-ADJUST {White Balance Adjustment}
OPTION {Option Setting}
V-SUS {V-SUS Adjustment}
AGING
SRV-TOOL {Service Tool}
{1} & {2} buttons move through options
Press the {2} button once to select "SRV-TOOL".

And press the {OK} button to access it.

Using the cursor keys, highlight the right side
of the last item "PTCT :00.00.00.00.00" :

Then press and hold the {MUTE} button for 3 seconds.

Time and Count will be displayed in red color:

__TIME = Hours : Minutes of operation. 
COUNT = Times the Plasma was powered on.

To exit, unplug the power cable.

_<<<<<<<<<<< WARNING BY BRUZZI >>>>>>>>>>> 
_-The {VOL+} & {VOL-} buttons are used to change values
_-while in the Service Menu. Make sure not to touch those
_-buttons anytime while checking the hours used.

Link: http://www.highdefjunkies.com/showthread.php?1772-The-Official-quot-How-to-Check-the-Hours-Used-on-Your-Plasma-quot-Thread

Redigeret af Lars8000 - 15-December-2010 kl. 15:21

Forfatter	Besked Emne Søg Emne-funktioner Besvar Opret nyt emne Printervenlig udgave Oversæt Emne
Lars8000 Bruger-profil Send personlig besked Find brugers indlæg Føj til venneliste Bruger Oprettet: 08-Marts-2009 Sted: Denmark Status: Offline Point: 66	Emne: Antal timer på Pana G20 og andre pana modeller Sendt: 12-December-2010 kl. 00:40
	Her er en måde at holde styr på, hvor mange timer ens Panasonic G20 har kørt (Virker på følgende modeller X24 - C2 - U2 - S2 - G20 - G25 - VT20 - VT25) På eget ansvar, hvis man vil ind og checke Panasonic Consumer Models X24 / C2 / U2 / S2 / G20 / G25 / VT20 / VT25 Press and hold the {VOL -} button ON THE PLASMA. Then press the {INFO} button on the remote control 3 times. The Service Menu will be displayed with the following options: ADJUST {Picture Adjustment} WB-ADJUST {White Balance Adjustment} OPTION {Option Setting} V-SUS {V-SUS Adjustment} AGING SRV-TOOL {Service Tool} {1} & {2} buttons move through options Press the {2} button once to select "SRV-TOOL". And press the {OK} button to access it. Using the cursor keys, highlight the right side of the last item "PTCT :00.00.00.00.00" : Then press and hold the {MUTE} button for 3 seconds. Time and Count will be displayed in red color: __TIME = Hours : Minutes of operation. COUNT = Times the Plasma was powered on. To exit, unplug the power cable. _<<<<<<<<<<< WARNING BY BRUZZI >>>>>>>>>>> _-The {VOL+} & {VOL-} buttons are used to change values _-while in the Service Menu. Make sure not to touch those _-buttons anytime while checking the hours used. Link: http://www.highdefjunkies.com/showthread.php?1772-The-Official-quot-How-to-Check-the-Hours-Used-on-Your-Plasma-quot-Thread Redigeret af Lars8000 - 15-December-2010 kl. 15:21


Skift forum	Forum-tilladelser Du kan ikke oprette nye emner i dette forum Du kan ikke besvare indlæg i dette forum Du kan ikke slette dine indlæg i dette forum Du kan ikke redigere dine indlæg i dette forum Du kan ikke oprette afstemninger i dette forum Du kan ikke stemme i dette forum